Carpet mill??

[EWO]

It looks good.

3M contact cement will hold the ends together.

That type shelving board will work for a while. The glazed coating will eventually wear to the wood and it will be some drag and some eventual snagging. (Spent a number of years in the evolution of my own versions of the carpet mill). Don't scrap it though. Go to Stockcarproducts.com or Performancebodies.com. Race car publications that offer a rolled plastic. Usually sold in length of 10ft. Cut it to fit and it will last a lifetime. Cheap too.

Looks good.EWO

[Bostondawg]

It looks good.

3M contact cement will hold the ends together.

That type shelving board will work for a while. The glazed coating will eventually wear to the wood and it will be some drag and some eventual snagging. (Spent a number of years in the evolution of my own versions of the carpet mill). Don't scrap it though. Go to Stockcarproducts.com or Performancebodies.com. Race car publications that offer a rolled plastic. Usually sold in length of 10ft. Cut it to fit and it will last a lifetime. Cheap too.

Looks good.EWO

I put that on my Colby mill and like it a lot.

[BULLDOG ANONYMOUS]

this, is one i built in 2000

[BULLDOG ANONYMOUS]

http://youtu.be/gdA5qD9Aqnw