Building above ground kennel

[blak]

So I just went and bought half the lumber section at Home Depot, and I'm going to attempt to make Jack's above ground kennel set up. I had a few questions Jack, what type of hinge and hook do you use for your door? And for your houses, its all types of plywood choices, so I chose the 17/32, if that makes sense. Is that the size you use for your houses, and is it the same you use for your roofs? I have never built anything before, so here we go, pics to start soon as the sun comes out one more thing, to attach the panel to the wood, what do you use for those? Thanks in advance

blak

[No Quarter Kennel]

Blak

I've built several and Jack's plan is as good as any to follow. ESPECIALLY, if you have never built anything before.

Hinges - here's what I use http://www.lowes.com/pd_64172-1277-9...7C1&facetInfo=
Latch - I like these http://www.lowes.com/pd_445623-48446...t_avg_rating|1
Just put a quick link or something to hold it shut.

You'll attach your panel to the outside of your pen with large staples - I always use 3/4" (that's the width) and I want then 1 1/2" long. Get you two pounds - that typically does a full pen for you. http://www.lowes.com/pd_58239-37672-...61&Ntt=staples

Best of luck and have fun. Post up them picks.

One suggestion I got from a guy I built some for once, was to put the door in the middle of the side. That's a good idea as you'll be able to reach inside the entire pen for whatever reason.

Good Luck!

[blak]

Thank you NQK, I will get pics posted as soon as I start, it's such a big project to me, I afraid to fuck off my wood, lol.

[EWO]

Thank you NQK, I will get pics posted as soon as I start, it's such a big project to me, I afraid to fuck off my wood, lol.

The old folks say, "Measure twice, cut once". I will try to get a couple pf pictures the two boxes I have. One is a double walled insulated box. And the other is more for older pups before they hit the ground. Building the box is like a lot of other projects. It looks so much more going in than what it really turns out to be. Best of luck. EWO

[blak]

Ok, after a bout of illness, some long days and nights, I got the damn thing built. It wasn't easy, but I did with the help of a young knucklehead on spring break.

This is what I started with, a truck full of stuff, lol.


So after I download all the "stuff", I start to cut into the 4x4's.



I got an old saw I picked up for 20 bucks, don't know if it's even worth it, but it looked cool. I doesn't have a ruler on the adjustable cutting depth, so I measured with my square.

Needless to say, I was off a bit


So I start to put things together, and I start to see something forming, not sure what but something is coming along



Got all my bottom crossmembers and slats installed, time for the house



Now to put the top crossmembers on and the plywood, and then wrap it, now it's starting to look like the pictures I keep referring too,lol


Call me dumb or stupid, but the damn door was one of the hardest things to make. My construct was a little crooked after all the connecting was done, so it took some improvising to get the door complete, but we got it done(barely).


And now for the finished product



I must say, Jack's plan's work, and I really get a sense of enjoyment and accomplishment from building one for my hounds. I will be making at least two more, and some things I learned from this process are, 1. Have two drills, one for a drill bit to pre-drill holes, and another for the driving of the screws.( I spent a lot of time switching in between drill bits and screw heads) 2. Once you make a cut that you will need multiple of, instead of measuring again, if possible, use the cut you just made to make the measurement. 3. Don't just throw stuff down, be organized. I spent a lot of time looking for Item's I "just" had and now I can't find them. 4. Hands of plenty make for ease of work. The more good help you have, the faster the process. Hope my post was helpful to someone one out there.

blak

[scary]

The old folks say, "Measure twice, cut once". I will try to get a couple pf pictures the two boxes I have. One is a double walled insulated box. And the other is more for older pups before they hit the ground. Building the box is like a lot of other projects. It looks so much more going in than what it really turns out to be. Best of luck. EWO

EWO im still waiting to see yours sir

[Officially Retired]

I am no carpenter, but the plans I built are basic and solid, and they will last a long time.

[EWO]

Good job. I would use treated wood on the next one. There is a lot of washing and sun over time and the non-treated stuff will eventually give up. The next time it is free soak it down with some sort of water sealant, Thompson's,etc...etc.... Looks good tho. The best thing is that you identified four ways ot improve the build. next time you will find four more, and so on. Blink and you will have an assembly line going. Good job. EWO

[blak]

Good job. I would use treated wood on the next one. There is a lot of washing and sun over time and the non-treated stuff will eventually give up. The next time it is free soak it down with some sort of water sealant, Thompson's,etc...etc.... Looks good tho. The best thing is that you identified four ways ot improve the build. next time you will find four more, and so on. Blink and you will have an assembly line going. Good job. EWO

Thanks EWO, I'm about to go water seal it right now, it's super sunny out, and that's what I been waiting for. The dog in the pic was just to test the walls out and take a pic, I took the dog out and covered it as soon as I was done.

blak

[EWO]

Looks good. I will try to get a pic of mine like I said I would the other day. I forgot. We built a deck for a guy and he had some odd requests and we ended up with a lot of 5/4 treated deck boards that were like 39" so that is the width of my box, as well as the box itself, the siding for the box, just about everything. Pretty much half the materials were free. I like free. The non treated wood will last for awhile if kept treated. The bleach/disinfectants/sanitizers are hard on the wood and hard on the sealers as well, but if treated regularly they will last damn near forever. The biggest difference is the treated wood is more forgiving if it is not treated as often. Looks good. EWO